Bronco on a stick, part two

The 1975 Ford Bronco body shell that I primered in an earlier post has gone to the next stage, so I thought I would update to show the progress. We did find a couple of rust spots and I fixed them, I'll make a seperate post about those.

Heres a look at it like it sits now, ready for some polyester primer on the outer panels. I welded in a few dozen holes, for this reason or that. The new spare tire carrier rides on the bumper rather than having hinges attached to the body, etc. A rollbar will also be added. The truck has already been fitted for the engine from about a '99 Explorer (EFI 5.0), plus Vintage Air, so I welded up most of the holes in the firewall and engine compartment, one of the fuel fill necks, and a few various holes in the floor. Check it out in the bondo stage!